Andy Ball??? race loom

Technical questions and answers

Andy Ball??? race loom

Postby TURK » Sat Apr 02, 2016 6:22 pm

Hi all
I have a brand new race loom. I believe it was made by Andy Ball.
Unfortunately I do not have and diagrams that tell me what conector goes where as the race loom has completely different connectionstyles. 
The loom that was fitted is a mess and I'd like to fit the new one.
any help would be much appreciated.
Thanks
Steve
TURK
Pit Bitch
Pit Bitch
 
Posts: 10
Joined: Tue Jan 01, 2013 11:10 am

Re: Andy Ball??? race loom

Postby Higgsy » Mon Apr 04, 2016 10:08 pm

Just seen your other post Steve, i'll ask Andy and see whats what for you.
Higgsy
Spammer
Spammer
 
Posts: 2009
Joined: Tue Mar 17, 2009 5:50 pm
Location: Medway Marauder

Re: Andy Ball??? race loom

Postby TURK » Tue Apr 05, 2016 7:40 am

Thanks mate
That would really help me out. It's a shame not to use the race loom as it's so neat.
TURK
Pit Bitch
Pit Bitch
 
Posts: 10
Joined: Tue Jan 01, 2013 11:10 am

Re: Andy Ball??? race loom

Postby Bally » Tue Apr 05, 2016 5:36 pm

Hi mate.

I'm sure I can help you out.

To use the loom its best to replace all connectors on the bike (cdi rev counter pv etc) to suit the loom

Do you have the spare connector housings and crimps with the loom?

you only need some basic tools and its not complicated to do.

Are you happy to do this work ? If so I can supply instructions with details on what goes where.

Cheers Andy.
User avatar
Bally
Pit Bitch
Pit Bitch
 
Posts: 19
Joined: Thu Apr 02, 2009 11:22 pm

Re: Andy Ball??? race loom

Postby TURK » Tue Apr 05, 2016 7:08 pm

I have some of the crimps and connector blocks.
Im happy to swap out the original connections with the new one's.
So far I have figured our 3 of the connections on the loom and the 2 crimps that go to the primary side of the coil.(1 black and 1 Orange)
At the start of the loom ther is 2 connection blocks.
A 2 way connection block (1 black and one Brown) witch I think is the power supply for the YPVS unit.
A 6 way connection block with 5 wires (1 of witch is yellow) the other 4 wire bell to a 2nd 6 way block half way down the loom witch looks to connect to the YPVS servo/motor.
That's as far as I got. Before a gave up and repaired the old loom.
All for the above is from memory as I'm away from home now and don't have the loom in front of me so may not be 100%.
I'm home again Saturday and will try aging.
All he'll will be much appreciated
Thanks
Steve
TURK
Pit Bitch
Pit Bitch
 
Posts: 10
Joined: Tue Jan 01, 2013 11:10 am

Re: Andy Ball??? race loom

Postby Bally » Wed Apr 06, 2016 6:04 pm

Hi Mate

sent you a pm

Cheers
User avatar
Bally
Pit Bitch
Pit Bitch
 
Posts: 19
Joined: Thu Apr 02, 2009 11:22 pm


Return to Technical

Who is online

Users browsing this forum: No registered users and 1 guest

cron
 

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 151 on Sat Sep 14, 2013 1:00 pm

Users browsing this forum: No registered users and 1 guest

Current time

It is currently Sat Nov 25, 2017 12:28 pm
RocketTheme Joomla Templates